Sitemap  -  Collection  -  中文版  -  ENGLISH

Hello, welcome to SOC (Jiangsu) Environmental Technology Co.,Ltd. website!

Drive product innovation with design

Committed to building a leading benchmark in the industry

Hotline: +86 153-7183-3337

Your location: Home>>News>>Industry news
Four basic principles of dust-free workshop construction

Publisher: SOC (Jiangsu) Environmental Technology Co.,Ltd. | Hits: 246 | Published on: 2022-8-18 17:56:00 | Close

   Dust-free workshop decoration is a multi-functional integrated whole. First of all, multi-professional cooperation is required - construction, electrical, air conditioning, purification, pure water, etc. Secondly, multiple parameters need to be controlled, such as: air cleanliness, bacterial concentration, air volume, pressure, noise, illumination, etc. During the decoration process of the clean room, only professionals can comprehensively coordinate the cooperation between various professional contents to achieve good control of the parameters that need to be controlled in the clean room. Therefore, the construction process of the clean room is very important. When it comes to cleaning, be sure to pay attention to some basic principles to ensure the smooth completion of the clean room.
There are four basic principles for dust-free workshop construction:
1. Do not bring in: Do not bring any dust to the clean room, and the following conditions must be ensured:
  A. The high-efficiency filter and structure do not produce dust leakage.
  B. Maintain positive pressure in the dust-free workshop.
  C. Personnel can enter the dust-free workshop after changing clothes and shoes, and air shower.
  D. Materials and equipment can only enter the dust-free workshop after cleaning.
2. No generation: no dust is generated in the clean room, and the following conditions must be ensured:
    A. Personnel should wear clean clothes.
    B. Do not use materials and equipment that are prone to dust.
    C. Do not perform unnecessary movements.
    D. Do not bring in no supplies.
3. No accumulation: Do not accumulate any dust in the dust-free workshop, and the following conditions must be ensured:
    A. Do not make it difficult to clean the corners and surrounding areas of the equipment
    B. The dust-free workshop should not expose air ducts and pipes as much as possible.
    C. Comply with standardized purification procedures.
4. Quick removal: To quickly remove dust in the dust-free workshop, the following points must be done:
    A. Increase the ventilation rate.
    B. Set up an exhaust device near the place where dust is generated.
    C. Use a suitable airflow form to avoid dust sticking to the product.

Previous: Classification of clean room standards

Next: Main points of professional purification workshop

More

New Arrivals